关于wait.regexp使得匹配后该行保持有效的问题。

dreamnb

我在看http://blog.csdn.net/suxiaojack/archive/2008/10/10/3042706.aspx文章的时候，里面提到了
1、修改wait.regexp使得匹配后该行保持有效，触发器仍旧为临时触发（一劳永逸。）

我想问问这个如何修改呢？

tianheng

function regexp (regexp, timeout)
  local id = "wait_trigger_" .. GetUniqueNumber ()
  threads [id] = assert (coroutine.running (), "Must be in coroutine")

  check (AddTriggerEx (id, regexp,
            "-- added by wait.regexp",  
            trigger_flag.Enabled + trigger_flag.RegularExpression +
            trigger_flag.Temporary + trigger_flag.Replace, -- + 注意这个
            --trigger_flag.OneShot, -- 把此处注释就可以了,使得匹配后该行保持有效，触发器仍旧为临时触发
            custom_colour.NoChange,
            0, "",  -- wildcard number, sound file name
            "wait.trigger_resume",
            12, 100))  -- send to script (in case we have to delete the timer)

  -- if timeout specified, also add a timer
  if timeout and timeout > 0 then
    local hours, minutes, seconds = convert_seconds (timeout)

    -- if timer fires, it deletes this trigger
    check (AddTimer (id, hours, minutes, seconds,
                   "DeleteTrigger ('" .. id .. "')",
                   timer_flag.Enabled + timer_flag.OneShot +
                   timer_flag.Temporary + timer_flag.Replace,
                   "wait.timer_resume"))

    check (SetTimerOption (id, "send_to", "12"))  -- send to script

    -- if trigger fires, it should delete the timer we just added
    check (SetTriggerOption (id, "send", "DeleteTimer ('" .. id .. "')"))  

  end -- if having a timeout

  return coroutine.yield ()  -- return line, wildcards
end -- function regexp

[ 本帖最后由 tianheng 于 2010-9-4 09:57 AM 编辑 ]